Vibration Test – Shakers and Controllers

VibrationControllerType7542VC-LAN Vibration Controller – Type 7542

4-8 channels, with modular expansion up to 64 channels. Integration with data acquisition system enables 1000+ channels for recording, structural analysis or abort monitoring – for the safest testing.

Click Here for more information on the VC-LAN Vibration Controller – Type 7521

 

VC-LAN Vibration Controller –  Type 7541

2-4 channel, fully featured controller with LAN connectivity to facilitate remote monitoring of multiple units, and allow location adjacent to the shaker.

Click Here for more information on the VC-LAN Vibration Controller – Type 7541

 

LDS Permanent Magnet Shakers

High Energy and Cost Efficient Permanent Magnet Shakers

Permanent magnet electrodymanic shakers are designed for vibration test applications, including modal and structural analysis, separation and compacting of powders, small component vibration screening and for use in accelerometer calibration.These electrodynamic shakers are typically part of the vibration test equipment used in educational, research and laboratory environments.

Highly energy and cost-efficient, the permanent magnet construction provides the static field, thereby simplifying amplifier requirements to drive the electrodynamic shaker. Low mass armatures and LDS’s unique suspension system guarantee reliable performance of the vibration test equipment over a wide frequency band.

LDS V101 Permanent Magnet Shaker up to 8.9 N Sine Force Peak

The V101 (Sine Force Peak 8.9 N) shaker has been designed to reproduce a vibration environment under laboratory conditions. Although extensively used in industry they are ideally suited for use in universities and research establishments to investigate the dynamic behaviour of structures and materials. Other applications include fatigue and resonance testing, used as velocity transducers or high speed actuators and various medical/veterinary purposes.

Click Here for more information on the LDS V101

 

LDS V201  Permanent Magnet ShakerLDS V201 Permanent Magnet Shaker up to 17.8 N Force Peak

The V201 (Sine Force Peak 17.8 N) shaker is ideal for fatigue and resonance testing, and various medical/veterinary applications. The shaker has been designed to reproduce a vibration environment under laboratory conditions. Although extensively used in industry they are ideally suited for use in universities and research establishments to investigate the dynamic behaviour of structures and materials.

Click Here for more information on the LDS V201

 

LDS V406  Permanent Magenet ShakerLDS V406 Permanent Magnet Shaker 196 N Force Peak

The 400 Series electro-dynamic shakers has been designed to reproduce a vibration environment under laboratory conditions for quality and reliability. Extensively used in industry the vibrators are ideally suited for use in universities and research establishments to investigate the dynamic behaviour of structures and small, lightweight components and assemblies testing.

Click Here for more information on the LDS V406

 

LDS V450  Permanent Magenet ShakerLDS V450 Permanent Magnet Shaker 311 N Sine Force Peak

The 450 shaker is ideal for fatigue and resonance testing, used as velocity transducers or high speed actuators and various medical and veterinary applications. Although extensively used in industry the shaker is suited for use in universities and research establishments to investigate the dynamic behaviour of structures and materials.

Click Here for more information on the LDS V450

 

LDS V455  Permanent Magenet ShakerLDS V455 Permanent Magnet Shaker 489 N Sine Force Peak

The 455 offers customers a higher force for laboratory testing.  The shaker can be used as velocity transducers or high speed actuators and in a range of medical and veterinary applications.  Also the V455 is ideally suited for use in universities and research establishments to investigate the dynamic behaviour of structures and materials, fatigue and resonance testing.

Click Here for more information on the LDS V455

 

LDS Low Force Shakers

These small, air-cooled electrodynamic shakers are suitable for vibration testing of small to medium sized payloads. More powerful than our permanent magnet electrodynamic shakers, these air-cooled shakers are ideal for vibration testing of small automotive components and electronic assemblies. Utilizing LDS’s unique suspension system with rolling-strut and flexure to ensure excellent cross axis restraint, these proven vibration tables provide cost-effective product qualification and instrument calibration.

V500 V700 Electrodynamic ShakersLDS V555 Low Force Shaker 940 N Sine Force Peak

The V555 shaker will operate in the frequency range of DC to 6300Hz from either a sine or random input waveform. The shaker is designed to create a vibration environment. Qualification tests on components and small assemblies can be reproduced under controlled conditions using a wide frequency band.

Click Here for more information on the LDS V555

 

LDS V650  Low Force ShakerLDS V650 Low Force Shaker 2,200 N Sine Force Peak

The V650 is designed to reproduce a vibration environment. Qualification tests on components and small assemblies can be reproduced under controlled conditions using a wide frequency band. The shaker will operate in the frequency range of DC to 5000Hz from either a sine or random input waveform, converting an electrical current into mechanical force.

Click Here for more information on the LDS V650

 

LDS V721  Low Force ShakerLDS V721 Low Force Shaker 2,900 N Sine Force peak

The V721 shaker offers a 25.4 mm (1 inch) displacement continuous peak to peak. Qualification tests on various components and small assemblies can be reproduced under controlled conditions using the V721 wide frequency band electrodynamic shaker.

Click Here for more information on the LDS V721

 

LDS V780  Low Force ShakerLDS V780 Low Force Shaker 5,120 N Sine Force Peak

The V780 shaker is ideal for qualification tests on components and small assemblies can be reproduced under controlled conditions. The shaker will operate in the frequency range of DC to 4000 Hz from either a sine or random.

Click Here for more information on the LDS V780

 

LDS Medium Force Shakers

LDS vibration testing solutions provide comprehensive testing capabilities for the automotive, aerospace and defence, electronic and electrical machinery production sectors. With designs proven under the most demanding applications, from laboratory testing, modal and structural analysis through to testing of complete satellite systems, LDS can utilize its extensive technical experience to deliver a solution to meet your needs.

LDS V830  Medium Force ShakerLDS V830 Medium Force Shaker 9.8 kN Sine Force Peak

The V830 Electrodynamic Shaker is designed for the vibration testing of medium-sized payloads such as automotive components and other types of electronics assemblies up to 160 kg.

Click Here for more information on the LDS V830

 

LDS V850  Medium Force ShakerLDS V850 Medium Force Shaker 22.2 kN Sine Force peak

The V850 air-cooled Electrodynamic Shaker are designed for the vibration testing of medium-sized payloads such as automotive components and other types of electronics assemblies up to 350 kg.

Click Here for more information on the LDS V850

 

LDS V875  Medium Force ShakerLDS V875 Medium Force Shaker 35.6 kN Sine Force Peak

The LDS V875 Electrodynamic Shakers combine low installation and running costs with superior levels of safety, providing both the performance and capability demanded of vibration testing in research and development, product qualification, stress screening and reliability test applications.

Click Here for more information on the LDS V875

 

LDS V875LS  Medium Force ShakerLDS V875LS Medium Force Shaker 35.6 kN Sine Force Peak

A new 76.2mm-displacement Vibration Test System was recently designed for large payloads, package testing, and shock testing applications.

Click Here for more information on the LDS 875LS

 

LDS V8  Medium Force ShakerLDS V8 Medium Force Shaker 60 kN (duty cycled) or 57.8 kN (continuous)

The V8 vibration test system offers the highest achievable envelope of vibration test parameters for an electrodynamic shaker, ensuring maximum displacement, velocity and force are all available together, thus maximising test equipment usage.

Click Here for more information on the LDS V8

 

LDS High Force Shakers

LDS vibration testing solutions provide comprehensive testing capabilities for use in the automotive, aerospace, defence, electronic and electrical machinery production sectors. With designs proven under the most demanding applications, from laboratory testing, modal and structural analysis through to testing of complete satellite systems, LDS can utilize its extensive technical experience to deliver a solution, whatever your needs.

LDS V9  High Force ShakerLDS V9 High Force Shaker 105 kN Sine Force Peak

The V9mkII electrodynamic shaker is suited for high force long duration tests as well as low frequency and shock pulse tests, providing the versatility, low running costs and capability demanded for both research and development and production testing.

Click Here for more information on the LDS V9

 

LDS V964  High Force ShakerLDS V964 High Force Shaker 89 kN Sine Force Peak

LDS’s water-cooled, electrodynamic shaker is used to test some of the world’s most complex applications, including satellites, avionics, combined space simulation, military electronics and hazardous materials. Built for use with vibration tables capable of testing large payloads up to a mass of 5 tonnes with a maximum sine force rating of 89 kN (20000lbf).

Click Here for more information on the LDS V964

 

LDS V984  High Force ShakerLDS V984 High Force Shaker 160 kN Sine Force Peak

LDS’s water-cooled, electrodynamic shaker is used to test some of the world’s most complex applications, including satellites, avionics, combined space simulation, military electronics and hazardous materials. Built for testing large payloads up to a mass of 5 tonnes with a maximum sine force rating of 160 kN (36000lbf).

Click Here for more information on the LDS V984

 

LDS V994  High Force ShakerLDS V994 High Force Shaker 289 kN Sine Force Peak

LDS’s water-cooled, electrodynamic shaker is used to test some of the world’s most complex applications, including satellites, avionics, combined space simulation, military electronics and hazardous materials. Built for testing large payloads up to a mass of 5 tonnes with a maximum sine force rating of 289 kN (65000lbf).

Click Here for more information on the LDS 994