Is Your Hospital Quiet?

The Centers for Medicare and Medicaid Services will be issuing a new rule that would establish a value-based purchasing program for acute care hospitals paid under the Medicare Inpatient Prospective Payment System for inpatient services furnished to Medicare Benificiaries. The new program required by the Patient Protection and Affordable Care Act of 2010, would provide value-based incentive payments to hospitals beginning in FY 2013, based on their achievement of or improvement across a set of clinical quality and patient experience measures.

One of the survey questions under patient experiences is;

“During this hospital stay, how often was the area around your room quiet at night?”

Noise Monitors, placed on the wall, can provide instant visual feedback if the noise levels get too high.

  SoundEar II® has been specifically developed for use in hospitals and is approved in accordance with IEC 60601-1 (medical electrical equipment)

 

 Find out more about SoundEar Products, Click Here

 

Bruel & Kjaer Sponsors new Acoustics and Vibration Lab at NIA

NEW AEROSPACE VIBRATION AND ACOUSTICS LAB OPENS DOORS TO ADVANCED RESEARCH

Hampton, Va. –­ On Thursday April 12, local, regional, and commonwealth officials joined researchers, engineers, and students at a dedication ceremony celebrating the new National Institute of Aerospace Research and Innovation Laboratories at 1100 Exploration Way, in Hampton, Virginia. The 58,000 square-foot building is owned by Virginia Tech and overseen by the institute, who holds a long-term lease on the property.

As part of the facilities within the NIA Labs, the Bruel & Kaejer Laboratory for Aerospace Vibration and Acoustics is directed by Virginia Tech’s Samuel Langley Distinguished Professor of Engineering, Christopher R. Fuller. Fuller is an expert in acoustics and noise and vibration control and is noted for his distinguished work on control of the interior noise and vibration in aerospace applications, launch vehicle payload noise, and other related concerns in the automotive and marine industries.

Under a unique arrangement with NIA, the laboratory is sponsored by Bruel & Kjaer, world leaders in instrumentation and software for acoustic and vibration measurements and analysis. The laboratory contains state of the art instrumentation and equipment for measuring and analyzing vibration and sound.

“I am very pleased that a world renowned company such as Bruel & Kjaer has agreed to sponsor our laboratory” remarked Fuller. “The sponsorship and interaction with Bruel & Kjaer will undoubtedly lead to a significant increase in the quality and reputation of the work and education performed in our laboratory.”

Bill Wright, Bruel & Kjaer Application Engineer for the Mid Atlantic Region added, “Bruel & Kjaer is pleased to be helping with this partnership to ensure that NIA students can benefit from B&K’s core sound and vibration knowledge and our multiple and dedicated solutions for core markets such as aerospace, defense, electro acoustics and medical.”

The laboratory will support education in acoustics and vibration and enable advanced research on analyzing, understanding, and developing innovative solutions for noise and vibration problems in aircraft, rotorcraft, and spacecraft. Active noise control still offers much potential for the reduction of aircraft exterior noise and research in that area will be carried out in the new facility. Fuller noted, “One of NASA’s important goals is the development of environmentally friendly aircraft, and noise is a key aspect of this program. The work in this new lab will support NASA and the commercial aviation industry in developing quieter engines, airframe noise and interior noise in aircraft and rotorcraft.”

Multi-functional and advanced acoustic materials that reduce vibration and harvest energy will also be studied, as vibration control is an important consideration in designing efficient aircraft and space structures. Research conducted in the lab will help enable applications of acoustics to medicine as well.

Future directions in acoustics and vibration research to be considered in the laboratory include the investigation of meta acoustic materials which combine advances in nano and material technologies to create lightweight sound absorbing materials with increased performance. The combination of microbiology and materials may lead to genetically grown materials which have improved vibration and noise reduction qualities.

Read more about it

 

Bill Wright of Bruel & Kjaer addresses special guests during a tour of the Bruel & Kjaer Laboratory for Aerospace Vibration and Acoustics

Sound and Vibration Monitoring Instrumentation for Process Control

1.    Monitors – Past and Present

Two common themes are always present for the successful application of vibration or acoustical monitoring in a production environment.

  1. A noise or vibration event is currently being judged by workers to be the start or end of a particular process.
  2. By employing an automatic control system initiated by this event, a loss of production can be minimized.

There are many examples of this type of application in use today and we will discuss these later on. First a little history on the products developed to address these situations.

Continuous monitoring of sound and vibration has been used for the control of manufacturing processes for many years. In the early 1980’s Brüel & Kjær introduced the 2505 Multipurpose Monitor for automatic signal monitoring of vibration signals. With this monitor, one could connect a microphone, accelerometer or other piezoelectric device, and set limits to alarm the user when levels were exceeded. Filters were available to band limit the signal as well as detectors to average a highly fluctuating signal. There were also relays to interface with process control systems or other instrumentation. With this device a process control engineer could monitor vibration or acoustic levels automatically without the use of expensive analysis systems. These monitors were also used in the machine condition monitoring field as rudimentary overall vibration detectors and could be used to shut down the machine if levels were exceeded.

These early monitors were made up of discrete analog circuit boards housed in a weather proof enclosure. The end user selected the circuit cards needed for his or her application. Each circuit card performed a particular function such as signal conditioner, high and/or low pass filter, amplifier or attenuator and an RMS detector.  These circuit cards worked in conjunction with the meter module, alarm indicators and relays. The monitors had very little dynamic range so careful attention had to be paid to the circuit cards chosen for each application. One had to know a lot about the particular measurement and the transducers being employed.  Once selected, more circuit cards needed to be ordered if conditions changed. In the late 1980’s this product line was separated from the traditional business units at Brüel & Kjær and PCH Engineering was born. PCH Engineering continued the production of these monitors and other analog circuit designs before developing a new design of this key product with modern electronics.  With the development of digital signal processors, the functions of filters, gain/attenuation and RMS detection could be controlled with software. This made the application of these monitors much easier for the end users. Each monitor could be programmed in the field to meet the demands of the task at hand. The control and setup of the unit, via the supplied software, avoided the time-consuming analysis of the required settings prior to purchase.  One of the first products developed for this application was the PCH 1008 pictured below.

These new monitors have a PC interface for setting up the unit and displaying the results of the measurements. The programmed data is stored within the unit to enable the monitor to operate independently of the PC and retained in the case of a power failure. The DSP allows for the choice of many low pass and high pass filters as well as true RMS, Peak or Peak-to-Peak measurements. In addition, there are many built-in test functions and voltage references for checking out new test set-ups as well as system failure indicators and relays. The built-in relays are used to interface with PLC’s and other instrumentation and are triggered upon user defined threshold levels. In addition, there are electrical outputs for conditioned and unconditioned AC signals for additional spectrum analysis or waveform storage. These monitors are ideal for real time detection and control of vibration and acoustic events.

PCH Engineering has also developed a range of monitors for multichannel measurements using FFT analysis on an incoming vibration or acoustic signal. This FFT analysis can be defined by the end user to meet the particular needs of the application. The sampled time block is chosen to reflect the bandwidth of interest.  Alarm limits can be set on particular bands of interest within the FFT and are user selectable. Several frequency bands can be chosen and defined by the upper and lower frequency.  The resultant FFT calculations, updated for every time block, are displayed with the alarm bands highlighted while the PC is attached to the monitor for setup and testing.

2.    Examples of Monitoring for Process Control

One of the earliest applications was at an iron and steel plant. A hopper is used here to empty, alternately, sinter and coke into a blast furnace controlled by a computer. The blast furnace needs to know when the hopper empties completely to ensure that nothing is left, which the computer controls. The computer needed know when the emptying process completed without too long of a delay which would mean a loss of production. A worker could tell immediately when the hopper was empty simply by listening to it. A well placed accelerometer was able to measure the vibration when the hopper was being emptied and thus when the vibration stopped, the hopper was empty.  There are many more applications like this where product is being moved from one place to another in a manufacturing environment.

Another application was found at an oil refinery. After refinement of the oil into various gasoline products, the left over sludge is pumped into very large vessels or drums. Once there, the sludge is pressurized and heated until most hydrocarbons are extracted. The material that is left over is called Coke and has the consistency of charcoal. This leftover coke has to be flushed out of the drums with high pressure water jets so that the next batch of sludge can be pumped in. This is a twenty-four hour seven days a week operation and the faster the coke can be flushed out the faster the next batch can be processed. When the operators flush out the coke with the high pressure jets, there is a noticeable noise when the jets cut through the coke and is hitting the side of the drum. This is referred to as a clean cut and the sound is very much like the sound the spray of a garden hose on an empty metal trash can. When the jets are into the coke, or cutting the material, there is a noticeable quieting of the sound. It is important for the operators to know when there is a “clean cut” so that they do not waste time here and can maneuver the jets to a lower level to cut into the material. The operators should spend as much time as they can cutting the coke and less time at the clean cutting positions. An accelerometer mounted in an ideal location on the side of the drum is able to pick up this cutting noise when the jets are hitting the side of the drum. The monitor is able to close relays to illuminate lights to let the operator know when there is a clean cut.  The light turns off when the jets are cutting into the coke material.

These low cost, autonomous monitors are very useful in situations where an acoustic or vibration event needs to be detected and acted upon to save time and expense. More information can be obtained at www.pch-engineering.dk.